Summary

Liquid, quick-drying material for priming of floorsprior to applying self-levelling and repair materials. Suitable for use on concrete, anhydrite and cement basesd rendering, light concrete, wooden-like panels, ceramic tiles and asphalt concrete. Increases adhesion between floor and surfaces, closes pores and decreases forming of air bubbles.

Supplied in 1 and 6 litre plastic bottles/buckets.

Further Details

Characteristics

ready-for-use

increases adhesion between floor and surfaces

close pores

decrease forming of air bubbles

prevents mass dewatering before setting

inflammable

quick-drying

water - soluble

slightly odorous; yellow pigment added

Use

For priming of substrates made of concrete, anhydrite and cement based rendering, light concrete, wooden-like panels, ceramic tiles, and asphalt concrete.

Substrate preparation

The substrate must be stable, dry, compact, cleaned of dust, grease, oil etc. Concrete slurry (if any) should be removed, weaker parts of substrate should be removed and filled again. Grease, oil, dirt should be cleaned with 7110 base cleaner. The substrate must be dust-free.

Technical conditions

a. Mixing

Mix with water in proportion from 1:1 (on slightly absorbent surfaces) to 1:3 (on absorbent surfaces) or use non-diluted on wooden based surfaces.

b. Application

Apply 4180 primer with a dense brush or spray gun. Avoid forming of puddles.

c. Temperature:

Application temperature range +10° to +18°C.

d. Drying time:

Consumption:

1 litre of mira 4180 primer for 10-14 m2 depending on mixing ratio.

Cleaning of tools:

Tools should be cleaned with water directly after use.

Packing:

Bottles / plastic buckets 1 litre and 6 Litres.

Storage and transportation:

Keep and transport frost free. Protect from excess heat and sunrays. Storage period: min. 1 year from the production date in original and undamaged packing.

Industrial safety:

Medium contains no harmful substances; thus no special safety means shall be used.