The Hot Floors 160 watts per square metre are suitable for use in all areas with any floor covering. For use with tiles and stone you install the mat in the tile adhesive. For other floor coverings you just cover the mat with levelling compound.

To order just work out your floors space and choose the correct size below. If the size you require is larger than the sizes below then just contact us and we can prepare a quote for you.

Also if you require a thermostat to control the system, then we recommend one per room

The Hot Floors 200watts per square metre heating mats are suitable for use in high heat loss areas such as conservatories, or faster warm up times are required. For use only with tiles and stone you install the mat in the tile adhesive.

To order just work out your floors space and choose the correct size below. If the size you require is larger than the sizes below then just contact us and we can prepare a quote for you.

Also if you require a thermostat to control the system, then we recommend one per room

Summary

Elastic, water and frost resistant adhesive mortar with better adhesiveness. Used mostly for fixing of ceramic and clinker tiles on untreated or primed stable wall substrate made of concrete, light weight concrete or plaster board / marmox. Can also be used on floors and walls treated with 4400 multicoat, painted surfaces, old tiles, etc. The adhesive can be applied on substrate with small movements. Usually not recommended for tiles with water absorption below 0,3%. Grouting on walls - after several hours; on floor - after appr. 24 hours.

Supplied in 5 kg plastic strengthened paper bags.

Summary

Flexible, water and frost resistant, cement-based tile adhesive mortar with a great adhesiveness. Attaches to most substrate types and can withstand modest deformations. Recommended for fixing of all types of ceramic wall and floor tiles and natural stones. Suitable for thin heated floors, swimming pools as well as weak absorbing tiles and clinker with water absorption below 0,5%. Grouting on walls - after approx 12 hours; on floor - after approx 20-30 hours.

Supplied 15 kg plastic strengthened paper bags.

Summary

Flexible, water and frost resistant, quick hardening special tile adhesive mortar. Has the same application areas as 3130 superfix, and is used where a quicker hardening time is demanded. Grouting after approx 1 hour.

Supplied in 15 kg plastic strengthened paper bags.

Liquid, acryl based material for priming of all porous and absorptive substrates made of concrete, plaster board, plaster based on anhydrite or cement etc. before tile fixing. Increases adhesion between substrate and adhesive mortar layer. In non-diluted form applicable on wooden-based substrates in "dry room". Supplied in 1, 6 kg, plastic bottles/buckets.

This product is Used to seal walls / floors before using Mira 4400 Multicoat.

Summary

Liquid, quick-drying material for priming of floorsprior to applying self-levelling and repair materials. Suitable for use on concrete, anhydrite and cement basesd rendering, light concrete, wooden-like panels, ceramic tiles and asphalt concrete. Increases adhesion between floor and surfaces, closes pores and decreases forming of air bubbles.

Supplied in 1 and 6 litre plastic bottles/buckets.

Highly elastic, 100% waterproof, joint-less membrane for water isolation of walls and floors, wall/floor corners, connections of wall joints between panels or elements, pipe junctions in wet zone of wet rooms. The product may not be used in swimming pools, etc. Applicable on heated subfloors. Supplied in 2, 6 and 15 kg, plastic cans/buckets.